Lvifur Night Stand with Charging Station for your bedside
Light from your bedside lamp pools across the matte black top of the Lvifur Night Stand with Charging Station, and you quickly start calling it the Lvifur nightstand as it settles into the room. Its tall, narrow silhouette reads less like a statement piece and more like steady, quite furniture — slightly taller than the mattress so things sit within easy reach. Run a hand along the surface and the PU finish feels smooth and a touch plastic under your palm; the fabric-front drawers catch light differently, softening the visual weight. Near the back, the recessed outlets and USB ports tuck neatly out of sight until you need them, and a faint LED glow outlines the edge when the room goes dark.
Unpacking and your first impressions of the Lvifur night stand with charging station
You slide the box onto the floor and peel back the tape; the panels and pieces are wrapped in thin foam and plastic, so you find everything mostly tidy rather than loose. As you lift the assembled body out, it feels light enough to shift by hand but solid where the top meets the frame. A small packet with the adjustable feet and a short instruction sheet sits on top; you find yourself smoothing the fabric drawer fronts and tucking stray plastic from the packaging into a bin out of habit. there’s a faint factory smell that fades after a few hours, and a swift pass of your hand across the PU-finished surface reveals the level and slight give that comes with a wrapped piece of furniture.
When you position it by your bed you naturally test the drawers and the top surface: the fabric drawers pull out with a soft resistance and the seams settle differently as you open and close them several times. Plugging a phone into the integrated charging area happens without fuss — cords route the way you expect, and any slight wobble is mostly corrected after you adjust the feet and nudge the unit into place. Out of the box, finishes and textures can look a touch different under bedroom lighting than in photos, but they tend to settle into place once drawers have been used and the piece has been moved around a bit.
How the black PU finish and tall silhouette sit next to your bed and shape your room
The black PU finish reads as a dark,slightly reflective plane at bedside—absorbing most light but picking up narrow highlights from a lamp or phone screen. Up close the surface shows the small disturbances that happen with regular use: faint fingerprints, the soft nick where a wrist brushes the edge, and the occasional smoothing motion as hands or bedding are shifted. the tall profile breaks the horizontal line of the mattress into stacked tiers; fabric drawers interrupt the vertical rise so the piece doesn’t read as a single monolithic block, and the sheen of the PU changes subtly as someone moves past or reaches across it.
Placed against a headboard or in a corner, the unit establishes a clear vertical axis in the room and tends to draw the eye upward, which can make ceiling height feel more pronounced in some layouts. In tighter layouts the height also narrows the apparent aisle beside the bed, while in more open spaces it acts as a visual anchor that other furnishings drift around. Over time the finish and seams show ordinary signs of interaction—slight creasing where drawers are slid, a few surface marks where objects rest—and nightly routines often include the small gestures that keep it looking settled, like smoothing a drawer front or shifting a lamp to soften a reflection.
View full specifications and color options
What the fabric drawers and surfaces feel like when you handle them
When you run a hand across the top, the PU finish reads as smooth and almost cool at first contact. Your palm will notice a slight resistance compared with bare wood — not slick like glass, but not heavily textured either — and fingerprints or small smudges can become visible if you pause. Edges where the top meets the frame feel firmer; your fingers pick up the transition from the soft finish to the underlying structure more than you expect when reaching over the table at night.
Sliding your fingers over a drawer front is a different, quieter experience. The fabric has a faint weave you can feel if you trace it slowly; press with a thumb and the front gives a little, then springs back, which leads you to smooth down corners or tug at seams out of habit. The drawer pull area feels slightly reinforced under the fabric, and when you pull a drawer the motion is accompanied by a soft shuffle of textile and the brief impression of the inner liner — thinner, a touch papery compared with the exterior. In most cases you’ll find yourself adjusting the fabric occasionally with a fingertip where the seams meet the frame.
| Area | How it feels when you touch it |
|---|---|
| top surface (PU finish) | Smooth, slightly cool, shows light smudges; firm at the edge |
| Drawer front | Subtle woven texture, a little give under pressure, faint seam ridges |
| Drawer interior | Thinner lining feel, softer and papery compared with exterior |
| Handle/pull area | Notably reinforced under fabric; your fingertips sense the structure when tugging |
Measuring the footprint and how this nightstand fits into your bedside layout
Take a tape measure and mark the intended spot before you move the piece in. Measure the width along the wall and the depth from the wall to the edge of the mattress or bed frame, then outline that rectangle on the floor with painter’s tape so you can feel the footprint underfoot. Leave room behind the outline for the power cord to exit and for the adjustable feet to be turned; the unit can shift a little as you nudge it into place, and those small adjustments tend to matter more on carpet than on hard floors.when placed, people frequently enough smooth the front fabric panels or give the unit a gentle shove to align it with the bed—that subtle settling changes how close it sits to the mattress edge.
Once it’s in position, notice how the drawers and tabletop behave in use rather than relying only on numbers. Drawers need a bit of forward space when pulled out, and the bedside surface can feel differently reachable depending on mattress height or the presence of a platform.Light from any nearby LEDs or bedside lamps will cast a band of illumination that shifts when you move the nightstand a few inches; similarly, routing the charging cable behind the unit may create a slight gap against the wall. In many room layouts the footprint appears compact until drawers are opened or cords are routed—then the effective space it occupies increases by a few inches.
| What to measure | What to check while the stand is in place |
|---|---|
| Width along wall | Dose the unit sit flush or leave a visible offset once nudged into alignment? |
| Depth from wall to bed edge | Do drawers clear the bedding and allow a cozy pull? |
| Power cord path | Is there space for the cord without forcing the unit away from the wall? |
| Floor level | Does turning the adjustable feet change how the unit sits or rocks? |
How you interact with the USB ports outlets and drawers during a normal night
You set things down and plug them in as part of the end-of-day ritual. Your phone usually goes on the tabletop or rests against the edge while its cable snakes back to the built-in USB ports and outlets. With one hand you guide connectors into place; with the other you straighten a stray cable or tuck it toward the back so it doesn’t catch when you sit up.At dim bedside-light levels you tend to fumble a bit — cables get looped, sometimes draped over the side, sometimes coaxed behind the unit — and every now and then you shift an item a few inches to avoid a tug on a sleeping arm.
The fabric drawers come into play once you’re ready to wind down. You slide a drawer open to drop in reading glasses,a paperback,or a pair of earbuds; the drawer gives under your fingers and closes with a muffled hush. If a charging cable runs into a drawer, you can feel a subtle bulge where the fabric accommodates the cord, and you often nudge the drawer slightly to avoid pinching. Small, unconscious habits surface: smoothing the drawer face after closing, nudging the nightstand a hair to keep a cable from kinking, or leaving a device on top instead of tucking it away because the cord fits more easily that way.
| Item | Typical nighttime placement |
|---|---|
| Phone | On the tabletop or edge for charging |
| Watch / small charger | On the surface near the ports or beside the lamp |
| Reading glasses / book | Inside the top drawer |
| Headphones / earbuds | folded into a drawer or tucked on the surface |
How this nightstand fits into your daily routine and where it reveals limitations
In everyday use the piece settles into a rhythm: devices are habitually docked on its surface before lights go out, drawer pulls are seized with one hand while the other gropes for a bedside lamp, and small items — glasses, remotes, a paperback — are shuffled between the top and the fabric bins. The charging area becomes part of the nightly routine, with cords routed behind the unit and habitually nudged into place; over time that routing can create a small tangle at the back that gets smoothed out in the dark. opening and closing the fabric drawers is an almost subconscious motion at bedtime, and the sound and feel of the fronts shifting into position become cues that the day is ending.
Some limitations reveal themselves through repeated use rather than in a first encounter. The drawer fronts tend to soften under heavier loads,which produces a slight bow when they’re pulled forward quickly; reaching lower compartments requires bending further down than some routines allow. Surfaces where cups or reading lights sit show small marks after a few weeks of daily use,and the LED/lighting elements that make night retrieval easier can feel uneven depending on how the bedside lamp and the room’s ambient light interact. Small adjustments to the unit’s base are frequently enough made over time to keep it from wobbling on imperfect floors, and cords that are tucked behind will occasionally work loose during cleaning or when reaching for items in the back of a drawer.
View full specifications and color options
How you put it together and the simple upkeep it will require
When you unpack the pieces, the parts tend to feel light and the boards have pre-drilled holes, so the assembly moves along in chunks rather than a slow, detailed build. You’ll line up side panels, guide connector pieces into place, and press the fabric drawers into their tracks; some screws need a bit of elbow grease to seat fully. Most people find a Phillips screwdriver and a short burst of patience enough, though having a second pair of hands for the taller frame makes the process quieter and a little faster. The little adjustable feet at the base screw in last and let you correct a wobble if the floor is uneven — you’ll usually fiddle with them once or twice until things sit flat.
Keeping it in day-to-day shape is uncomplicated. The PU-finish surfaces invite the sort of upkeep where you wipe away fingerprints or coffee rings with a damp cloth and then smooth the top with your hand; the fabric drawers can crease or shift slightly when you slide them in and out, and you’ll nudge seams back into place without thinking about it. Screws sometimes loosen after the first week of use, so you tend to tighten them once more after the piece has settled.if there are any built-in electrical components, you’ll likely avoid wet-cleaning near them and dust around cords as part of a quick weekly pass.
| What to expect | Typical time |
|---|---|
| Single-person assembly (unboxing to standing) | 20–40 minutes |
| Simple upkeep (wiping surfaces, smoothing drawers, quick tightening) | 5–10 minutes per week |
How It Lives in the Space
You notice, over time, how it settles into your room’s rhythm instead of demanding attention. The Lvifur Night Stand with Charging Station, LED Dresser for Bedroom Tall Nightstand with USB Ports and Outlets, 4 Fabric Storage Drawers with PU Finish, Bed Side Table (Black) becomes the small constant beside your bed, holding chargers, the book you meant to finish and the morning cup that leaves a pale ring. in daily routines the drawers open and close with familiar resistance and the surface gathers tiny scuffs that read as regular use rather than blemish as the room is used. In the quiet of evenings it rests.
As an Amazon Associate I earn from qualifying purchases.
